Imidamiphos Flash Dryer
  • Air ProImidamiphos Flash Dryer

Imidamiphos Flash Dryer

Welcome to buy Imidamiphos Flash Dryer from us. Every request from customers is being replied within 24 hours.

Send Inquiry

Product Description

Imidamiphos flash dryer

 

FEATURES


1. Heat source: steam, electric heating, heat transfer oil

2.  Material: Stainless steel, carbon steel, titanium, etc

3. Saving pretreatment before drying, crushing and screening after drying

4. High drying intensity, suitable for the drying of paste and filter cake

5. Compared with the box drying method, the energy can be saved 30-50% without crushing after drying;

6. There is no wall sticking on the equipment body

7. High thermal efficiency, fast drying, short heating time of materials, not easy to destroy the components of dry materials, especially conducive to the drying of heat sensitive materials

8. Continuous operation, suitable for mass production

9. Time saving: highly intelligent design, man-machine interface, one button operation, PLC automatic control of the whole process of equipment operation, online and remote control, manual operation

10. Labor saving: save labor cost and reduce labor intensity

11. Closed operation, no pollution to the environment;

12. Convenient installation: convenient installation and demolition, less floor area, can be installed indoor and outdoor


 

WORKING PRINCIPLE


The hot air enters into the bottom of the drier in tangent direction. Under the driving of the stirrer, a powerful rotating wind field is formed. The paste state materials enter into the drier through the screw feeder. Under the powerful function of the stirring vanes at high-speed rotation, the materials are distributed under the function of strike, friction and shearing force. The cake state materials will be smashed and contact the hot air fully and the materials are heated and dried. The dehydrated materials will go up with the hot-air flow. The step rings will stop and keep the big particles. Small particles will be discharged out of the drier from the center of the machine and the material will be collected by cyclone separator of dust collector. The wet or big particles will be swing towards to the wall by the centrifugal force function and the materials will be crushed again after fall down to the bottom.
 

 

APPLICATION


Organics: Atrazine (Pesticides), Cadmium Laurate, Benzoic Acid, Germicide, Sodium Oxalate, Cellulose Acetate, Organic Pigments, and etc. Dyes: Anthraquinone, Black Iiron Oxide, Indigo Pigments, Butyric Acid, Titanium Hydroxide, Zinc Sulfide, Azo Dye Intermediates, and etc. Inorganic: Borax, Calcium Carbonate, Hydroxide, Copper Sulfate, Iron Oxide, Barium Carbonate, Antimony Trioxide, Metal Hydroxides, Heavy Metal Salts, Synthetic Cryolite, and etc. Food: Soy Protein, Gelatinized Starch, Lees, Wheat Sugar, Wheat Starch, and etc.Suitable for food, chemical, pharmaceutical and other industries

 

TECHNICAL PARAMETERS


Item \ Model

XSG-2

XSG-4

XSG-6

XSG-8

XSG-10

XSG-12

XSG-16

XSG-20

Tower Diameter (mm)

200

400

600

800

1000

1200

1600

2000

Air amount (M3/h)

350-500

1150-2000

2450-4500

4450-7550

7000-12500

10000-20000

18000-36000

28200-56500

Water Evaporation (kg/h)

12-17

40-70

80-150

150-250

230-4250

300-600

600-1000

1000-1500

Total Power (kW)

10

20

40

65

85

105

150

230

Max. Equipment Height (m)

4.0

4.8

5.8

6.5

7.1

7.8

8.8

10.1

Occupied Area (m2)

15

20

28

35

40

52

80

150


Note:
1. The evaporated amount of moistureis calculated when the temperature of inlet is l80oC and Ihe temperature of outlet is180oC and the temperature of outlet is 180oC;
2. Besides the models above mentioned, special specification can also be made as request;
3. The equipped capacity above mentioned is standard. The power can also be decreased in accordance with pracitcal condition.


Raw Material Example & Characteristics (based on Model XSG-6)


Item \ Raw Material

Stearate Acid

Aluminum hydroxide

Zinc Carbonate

Monosultap

TMTD

DSD
Acid

Red Iron Oxide

Antimony
Dioxide

Cuprous
Chloride

White
carbon
black

Inlet Air Temperature (oC)

150

180

150

120

140

150

200

180

200

280

Primary Moisture (%)

80

55

80

30

65

60

60

45

30

85

Final Moisture (%)

0.5

1.5

1.0

1.0

0.5

0.5

0.5

1.0

3.0

5.0

Practical Drying Capacity (kg/h)

140-160

250-280

130-170

80-110

80-120

80-120

300-350

280-320

290-310

250-300

 

Item \ Raw Material

ZDC
accelerant
ZDC

Oil
soluble
ink

Substitute
Zinc
Manganate

Phthaloc-
yanin
dye

Calcium
citrate

Superfine
calcium
carbonate

Slurry
treatment
agent

Sodium
isocyanurate
dioxide


Sodium
isocyanurate
trioxide

Inlet Air Temperature (oC)

150

150

120

150

140

160

200

180

150

Primary Moisture (%)

60

45

30

55

40

70

75

25

30

Final Moisture (%)

0.5

2.0

1.0

1.0

1.0

1.5

5.0

0.2-2

1.0

Practical Drying Capacity (kg/h)

80-110

350-380

120-150

160-180

300-350

430-470

290-310

80-120

90-150

 

Hot Tags: Imidamiphos Flash Dryer, Manufacturers, Suppliers, Wholesale, Buy, Factory, Customized, In Stock, Bulk, Brands, China, Made in China, Supply, Cheap, Discount, Low Price, Buy Discount, Price, Price List, Quotation, Stable Performance, HOT, Stable Quality